FMT Pro Instructional Videos and User Guides
Instructional Video
-
Chapters
- Introduction (1 min.)
- Mounting the FMT Pro (2 min.)
- Mounting the Router (10 min.)
- The FMT Pro Jig (11 min.)
- - The Clamp Plate and Clamping (3 min.)
- - The Table (20 sec.)
- - Jig Operation Concept (1 min.)
- - Safety and Router Operation (2 min.)
- - Wood Preparation (30 sec.)
—
—
—
—
—
- Mortise & Tenon Procedures (18 min.)
- - Single Mortise & Tenon Test (8 min.)
- - Production Procedures (6 min.) )
- - Small & Miniature Joints (4 min.)
- Multiple Joints (18 min.)
- - Double In Line Joints (5 min.)
- - Twin Joints (6 min.)
- - Quadruple Joints (8 min.)
- - Triple Joints (1 min.)
- Workpiece and Joint Options (14 min.)
- - Different Thicknesses (3 min.)
- - Longer & Shorter Joints (8 min.)
- - Thicker & Wider Boards (3 min.)
- Special Joints (23 min.)
- - Angled Joints (5 min.)
- - Through Tenons (3 min.)
- - Bridle Joints & Floating Tenons (5 min.)
- - Asymmetric Joints (2 min)
- - Haunched Joints (6 min.)
- - Doweling (2 min.)
- Other
- Joint Specifications (2 min.)
- Bit Selection (2 min.)
- Jig Adjustments (5 min.)
—
—
—
- Specialty Guides (10 min.)
- Mortise & Tenon Jigs Comparison (5 min.)
- How to Maintain your Router’s Collet (7 min.)
—
—
—
User Guide
-
Chapters
- Introduction (1.2 MB)
- 1 Mounting the FMT Pro (460 KB)
- 2 Mounting the Router (1.5 MB)
- Mounting and Removing the Router
- Fence Rod Mounting
- Screw Mounting
- 3 The FMT Pro Jig (1.9MB)
- The Clamp Plate and Clamping
- The Side Stop
- Outrigger Bars
- The Table
- Jig Operation Concept
- Safety and Router Operation
- Wood Preparation
- 4 Mortise & Tenon Procedures (1.8 MB)
- Single Mortise & Tenon Test
- Production Procedures
- Small Joints
- 5 Multiple Joints (1.5 MB)
- Double In Line Joints
- Twin Joints
- Quadruple Joints
- Triple Joints
- 6 Workpiece and Joint Options (771 KB)
- Different Workpiece Thicknesses
- Longer and Shorter Joints
- Thicker and Wider Boards
- 7 Special Joints (1.2 MB)
- Angled Joints
- Through Tenons
- Bridle Joints
- Asymmetric Tenons
- Haunched Joints
- Doweling
- Appendices
- I Joint Specifications, Guide and
Bit Selection (504 KB) - II Jig Adjustments (250 KB)
- III Parts List (565 KB)
- III Parts List for Earlier Model FMT Jigs (58 KB)
- IV Customer Support (41 KB)
—
- Specialty Guides (50 KB)
- Square Tenons, Louvers and Y-Axis
—
—
If you unable to open a pdf, check that you have the latest version of Adobe Reader. If not, click on the icon below to download it from the Adobe website.
If you have technical questions please contact us by email at help@leighjigs.com or by toll free phone at 800-663-8932.