Compare Mortise & Tenon Jigs

To see a video comparison of the FMT Pro and Super FMT, See Video .

 

FMT/FMT PRO Super FMT (Discontinued)
2002 to present 2009 to 2018 – No longer in production
CONSTRUCTION
Jig Material Aluminum Steel
Jig Finish Anodized – clear Powder Coated
Jig Body Aluminum extrusions, die-cast aluminum end housings CNC Punched and Formed Steel
Jig Table CNC machined Mic 6 aluminum plate – 0.500″ CNC Punched and Formed Steel
Clamp Plate CNC machined aluminum extrusion – 0.780″ CNC Punched and Formed Steel
Sub-base CNC machined aluminum plate – 0.185″ CNC Punched and Formed Steel
Jig Table Movement Held and released by cam lever, held square by machined guide ways and pins Held and released by Table Locking Latch and Table Locking Lever
JOINT OPTIONS
Standard no. of joint sizes Inches: 68* / Metric: 79* Inches: 68* / Metric: 79*
Specialty Square tenon joints Square tenon joints
Specialty Louver joints Louver joints
Specialty Y-Axis joints Y-Axis joints
STANDARD EQUIPMENT
Clamps Cam-action speed clamps F-Clamps
Clamping Capacity 3″ x 5-1/2″(76 x 140mm) 3″ x 5-1/2″(76 x 140mm)
Sight Integrated retractable Removable
Side Stop CNC machined aluminum, reversible with mortise steady CNC Punched and Formed Steel
Joint Guides Inch set: 5/16″(5 guides) / Metric set: 8mm(6 guides) nch set: 5/16″(5 guides) / Metric set: 8mm(6 guides)
DUST COLLECTION
Built-in with two adaptors Optional vacuum box port with two adaptors
OPTIONAL EQUIPMENT
Joint Guides (Inch) 16 optional guides (1/4″, 3/8″ & 1/2″ sets)
Joint Guides (Metric) 18 optional guides (6, 10 & 12mm sets) 18 optional guides (6, 10 & 12mm sets)
Joint Guides (Specialty) 7 optional guides (4 square tenon, 2 louver, 1 Y-Axis) 7 optional guides (4 square tenon, 2 louver, 1 Y-Axis)
Dust Collection (Included with FMT Pro)
* Hundreds of custom joint sizes are achievable with optional guides and bits