Leigh Super FMT Frame Mortise & Tenon Jig

Router Selection

The Super FMT can accommodate all popular brand routers. It is made for use with plunge routers only and will not work with fixed-base routers.

A router with a 1/2" collet is required to get the most from your jig. As shown below, all routers mount on the Super FMT sub-base using one of two methods: hold-down rods through the fence rod holes in the router base, or screws through the sub-base, directly into the router base.

Router That Fit Super FMT

BOSCH1611, 1611EVS, 1613, 1613EVS, 1613AEVS, 1614, 1614EVS, 1615, 1615EVS, 1617 Plunge Base, 1619EVS, B1450, B1550, GOF1600, GPF1700ACE, POF1200AE, POF1400ACE
CRAFTSMANMost models
DEWALTDW614, DW615, 616 Plunge Base, 618 Plunge Base, DW621, DW621K, DW624, DW625, DW625EK
ELUOF97, OF97E, MOF96, MOF96E, MOF131, MOF177, MOF177EK, 3303, 3304, 3337, 3338, 3339
FESTOOL900, 1000, 1010, OF1400, OF2000, OF2000E, OF2200
FREUDFT2000, FT2200, FT3000
HITACHITR8, TR12, M8, M12 Series, M12VC
HOLZ-HER2355, 2356
MAKITA3600, 3612, 3612B, 3612BR, 3612C, RP1100*, RP1101*, RP0910*, RP1110C*, RP1801, RP2301
METABOOFE728, OF1028, OFE1028, OFE1229
PORTER CABLE(ROCKWELL)690 Series*, 890 Series including Type 2*, 7529*, 7538, 7539, 8529*
RYOBIR150, R151, R500, R501, R502, R600, R601, RE180PL, RE600, RE601
TRITONTRC001**, MOF 001**

*attaches directly to Leigh sub-base with included screws.
**contact Leigh or Leigh distributor for mounting screws.