BOSCH – 1614

Router Adaptor
Router Maker
BOSCH
Router Model
1614
Router Adaptor
RA1129

$16.00 CDN

$16.00 CDN

Notes

North American routers produced after mid 2010 require the RA1129 adaptor set which includes the RA1100 and RA1126. Routers produced before mid 2010 require only the the RA1100, which is included in the RA1129 set. The RA1100 is not sold separately.

7/16" OD Bushing ◆
e7

$21.00 CDN

$21.00 CDN

 
711C/711TP

$21.00 CDN

$21.00 CDN

1/2" OD Bushing ●
e8

$21.00 CDN

$21.00 CDN

5/8" OD Bushing ▲
e10

$21.00 CDN

$21.00 CDN

 
716C/716TP

$21.00 CDN

$21.00 CDN

Works with VGS
YES

◆ The e7 elliptical guide bushing, 7/16″[11,1mm] is supplied with the Leigh D4R Pro and SuperJigs for routing dovetails and box joints. Order only if you require a replacement. The 711C/711TP* guide bushing (7/16″[11,1mm]) can also be used, but only for routing dovetails.

● The 1/2″[12,7mm] e8 guide bushing is used only on Leigh F3, F24 and F18 Finger (Box) Joint Templates.

▲ The 5/8″[15,9mm] 716C or 716TP* guide bushing is used for 1/2″[12,7mm]

shank through dovetail bits on the D4R Pro. The 5/8″[15,9mm] e10 guide bushing is used on Leigh F3, F24 and F18 Finger(Box) Joint Templates.

* Note: The 711TP and 716TP guide bushings have been replaced by 711C and 716C guide bushings.

Router not listed?
If your router is not listed in the chart above, you may be able to fit a universal baseplate to your router. Please contact Leigh for assistance.