Review Leigh’s full range of jigs, joinery capabilities and optional attachments below:
(Select 3 jigs at most to compare)
This chart is best viewed on a larger screen
To see a video comparison of the D4R Pro and Super Jigs, See Video
.
|
|
|
|
| JOINT OPTIONS |
| Variably Spaced Through Dovetails |
| Variably Spaced Half-Blind Dovetails |
| Single Pass (Fixed) Half-Blind Dovetails |
| Sliding Dovetails |
| Rabbeted Half-Blind Dovetails |
| Box (Finger) Joints |
| Box (Finger) Joints w/Optional Template |
| Inlaid Dovetails |
| End-on-End Dovetails |
| Asymmetrical Joints (Through and HB) |
| Simple Angle Joints |
| Obtuse Angle Joints |
| Acute Angled Joints |
| Compound Angled Joints |
| Needle Pins |
| Shelf Holes and Shelf Notches |
| Isoloc Joints |
|
|
| JOINT SPACING |
| Through and HB Variable Tail Spacing |
| Through and HB Variable Tail Sizing |
| Through and HB Variable Pin Spacing |
| Through Variable Pin Sizing |
|
| JOINT FIT |
| Through Adjustment for Fit |
| Half-Blind Adjustment for Fit |
| Box Joint Fit Adjustment |
|
| CAPACITIES |
| Maximum Board Thickness |
| Minimum Board Thickness |
| Maximum Board Width |
| Minimum Board Width / Min. Pin Centers |
| Maximum Through Pin/Tail Board Thickness |
| Maximum Half-Blind Board Thickness |
|
| STANDARD EQUIPMENT |
| Spacer, for Box (Finger) Joints |
| Spacer, for Single Pass Dovetails |
| Nylon Stop Rod |
| 8mm Shank Bits |
| 1/2″ to 8mm Collet Reducer |
| Through Dovetail Bits |
| Through Dovetail Straight Bits |
| Half-Blind Dovetail Bits |
| Box Joint Bits |
| Guide Bushing |
| Bridge Piece Material |
| Fully Illustrated User Guide |
| Instructional Video |
|
| OPTIONAL EQUIPMENT |
| Through Dovetail Bits |
| Through Dovetail Straight Bits |
| Half-Blind Dovetail Bits |
| Box Joint Bits |
| Guide Bushing Sizes |
|
| CONSTRUCTION |
| Jig Body |
| Jig Body End Housings |
| Finger Style |
| Sidestops |
| Clamping Mechanism |
| Clamping Surface |
| Clamp Bars |
| Crosscut Fence (For Sliding Dovetails) |
| Bridge Piece Material |
 |
| D4R Pro |
| 2010 to present |
|
|
| YES |
| YES |
| YES |
| YES |
| YES |
| 3/8″ & 3/4″ Adjustable Fit |
| 11 sizes |
| YES |
| YES |
| YES |
| YES |
| YES |
| YES |
| YES |
| YES |
| YES |
| 6 Patterns with Templates |
|
|
| Infinitely Variable |
| Infinitely Variable |
| Infinitely Variable |
| Infinitely Variable |
|
| Recordable, Repeatable |
| Recordable, Repeatable |
| Recordable, Repeatable |
|
| 1-1/2″ |
| 1/8″ |
| 24″ |
| 1″ |
| Pin 1-1/4″, Tail 1″ |
| 1-1/2″ |
|
| YES |
| YES |
| YES |
| YES |
| YES |
| 1 bit: 1/2″ 8º |
| 1 bit: 5/16″ |
| 2 bits: 1/2″ 8º and 1/2″14º |
| 1 bit: 5/16″ |
| e7 eBush |
| YES |
| YES |
| Online |
|
| 6 |
| 2 |
| 3 |
| N/A |
| 1 |
|
| Machined Aluminum Extrusion |
| Cast Metal |
| 2-piece |
| CNC Machined In |
| Cam-Action Speed-Clamp |
| Machine Textured |
| Trapezoid Aluminum |
| Rigid Plastic Extrusion |
| Rigid Plastic Extrusion |
|
| SUPER 12 |
| 2007 to present |
|
|
| YES |
| YES |
| YES |
| YES |
| YES |
| 5/16″ & 5/8″ Adjustable Fit |
| NO |
| YES |
| YES |
| YES |
| YES |
| Limited |
| Limited |
| Limited |
| YES |
| YES |
| NO |
|
|
| Infinitely Variable |
| Infinitely Variable |
| Infinitely Variable |
| Use Technical Bulletin |
|
| Recordable, Repeatable |
| Recordable, Repeatable |
| Recordable, Repeatable |
|
| 1″ |
| 1/8″ |
| 12″ |
| 7/8″ |
| Pin 13/16″, Tail 1″ |
| 1″ |
|
| YES |
| YES |
| YES |
| YES |
| YES |
| 1 bit: 1/2″ 8º |
| 1 bit: 5/16″ |
| 2 bits: 1/2″8º and 1/2″14º |
| 1 bit: 5/16″ |
| e7 eBush |
| YES |
| YES |
| Online |
|
| 4 |
| 0 |
| 3 |
| N/A |
| 0 |
|
| 2-Piece Aluminum Extrusion |
| Glass-reinforced Nylon |
| 1-piece |
| Bolt-On Adjustable |
| Cam-Action Speed-Clamp |
| Non-Slip Tape |
| Trapezoid Aluminum |
| Rigid Plastic Extrusion |
| Rigid Plastic Extrusion |
|
| SUPER 18 |
| 2007 to present |
|
|
| YES |
| YES |
| YES |
| YES |
| YES |
| 5/16″ & 5/8″ Adjustable Fit |
| 6 sizes |
| YES |
| YES |
| YES |
| YES |
| Limited |
| Limited |
| Limited |
| YES |
| YES |
| 2 Patterns with Template |
|
|
| Infinitely Variable |
| Infinitely Variable |
| Infinitely Variable |
| Use Technical Bulletin |
|
| Recordable, Repeatable |
| Recordable, Repeatable |
| Recordable, Repeatable |
|
| 1″ |
| 1/8″ |
| 18″ |
| 7/8″ |
| Pin 13/16″, Tail 1″ |
| 1″ |
|
| YES |
| YES |
| YES |
| YES |
| YES |
| 1 bit: 1/2″ 8º |
| 1 bit: 5/16″ |
| 2 bits: 1/2″8º and 1/2″14º |
| 1 bit: 5/16″ |
| e7 eBush |
| YES |
| YES |
| Online |
|
| 4 |
| 0 |
| 3 |
| N/A |
| 0 |
|
| 2-Piece Aluminum Extrusion |
| Glass-reinforced Nylon |
| 1-piece |
| Bolt-On Adjustable |
| Cam-Action Speed-Clamp |
| Non-Slip Tape |
| Trapezoid Aluminum |
| Rigid Plastic Extrusion |
| Rigid Plastic Extrusion |
|
| SUPER 24 |
| 2007 to present |
|
|
| YES |
| YES |
| YES |
| YES |
| YES |
| 5/16″ & 5/8″ Adjustable Fit |
| 6 sizes |
| YES |
| YES |
| YES |
| YES |
| Limited |
| Limited |
| Limited |
| YES |
| YES |
| 4 Patterns with Templates |
|
|
| Infinitely Variable |
| Infinitely Variable |
| Infinitely Variable |
| Use Technical Bulletin |
|
| Recordable, Repeatable |
| Recordable, Repeatable |
| Recordable, Repeatable |
|
| 1″ |
| 1/8″ |
| 24″ |
| 7/8″ |
| Pin 13/16″, Tail 1″ |
| 1″ |
|
| YES |
| YES |
| YES |
| YES |
| YES |
| 1 bit: 1/2″ 8º |
| 1 bit: 5/16″ |
| 2 bits: 1/2″8º and 1/2″14º |
| 1 bit: 5/16″ |
| e7 eBush |
| YES |
| YES |
| Online |
|
| 4 |
| 0 |
| 3 |
| N/A |
| 0 |
|
| 2-Piece Aluminum Extrusion |
| Glass-reinforced Nylon |
| 1-piece |
| Bolt-On Adjustable |
| Cam-Action Speed-Clamp |
| Non-Slip Tape |
| Trapezoid Aluminum |
| Rigid Plastic Extrusion |
| Rigid Plastic Extrusion |
|
| RTJ400 |
| 2014 to present |
|
|
| NO (2 Fixed Widths) |
| NO |
| YES |
| NO |
| YES |
| 3/32″, 3/16, 3/8″& 3/4″ |
| NO |
| NO |
| YES |
| NO |
| YES |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
|
|
| Fixed Width |
| Fixed Width |
| Fixed Width |
| Fixed Pitch |
|
| Recordable, Repeatable |
| Recordable, Repeatable |
| Recordable, Repeatable |
|
| 1″ |
| 1/8″ |
| 16″ |
| 1-1/2″ (3/4″ with procedure) |
| Pin 13/16″, Tail 1″ |
| 1″ |
|
| N/A |
| N/A |
| YES |
| 1/2″ |
| N/A |
| 1 bit: 1/2″ 8º (80-500) |
| 1 bit: 1/2″ (160) |
| 1 bit: 1/2″14º (120-500) |
| 1 bit: 3/8″ (143-500) |
| e10 eBush |
| YES, Blockers |
| YES |
| Online |
|
| 4 |
| 1 |
| 2 |
| 2 |
| 1 |
|
| Machined Aluminum Extrusion |
| Glass-reinforced Nylon |
| Machined Aluminum Template |
| Adjustable Screw On |
| Cam-Action Speed-Clamp |
| Machine Textured |
| Glass-reinforced NylonArms |
| N/A |
| Injection Molded Blocker |
|
| R9 Plus (Discontinued) |
| 2011 to 2018 |
|
|
| NO (Fixed Width) |
| NO |
| NO |
| NO |
| NO |
| 3/16, 3/8″& 3/4″ Adjustable |
| NO |
| NO |
| NO |
| NO |
| YES |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
|
|
| Fixed Width – TD Only |
| Fixed Width |
| Fixed Width |
| Fixed Pitch |
|
| Recordable, Repeatable |
| N/A |
| Recordable, Repeatable |
|
| 7/8″ |
| 1/8″ |
| Unlimited |
| 1-1/2″ (3/4″ with procedure) |
| Pin 13/16″, Tail 1″ |
| N/A |
|
| N/A |
| N/A |
| NO |
| 8mm & 1/2″ |
| YES |
| 1 bit: 1/2″ 8º |
| 1 bit: 1/2″ |
| N/A |
| NO |
| e10 eBush |
| NO |
| YES |
| Online |
|
| 1 |
| 1 |
| N/A |
| 2 |
| 1 |
|
| User made: Wood |
| N/A |
| Machined Aluminum Template |
| Adjustable Screw On |
| F-Clamps |
| Wood, Plywood or MDF |
| N/A |
| N/A |
| N/A |
|
| B975 |
| 2017 |
|
|
| NO |
| NO |
| NO |
| NO |
| NO |
| 1/2″ & 3/4″ Adjustable fit |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
|
| N/A |
| N/A |
| N/A |
| N/A |
|
| N/A |
| N/A |
| Recordable, Repeatable |
|
| 13/16″ |
| 1/8″ |
| 17 13/16″ |
| 1-1/2″ |
| N/A |
| N/A |
|
| N/A |
| N/A |
| N/A |
| N/A |
| N/A |
| N/A |
| N/A |
| N/A |
| Leigh No. 160 – 1/2″ |
| e10 eBush |
| N/A |
| Yes |
| Online |
|
| NO |
| NO |
| NO |
| 2 |
| NO |
|
| Glass filled Nylon |
| N/A |
| Fixed – Equal Spaced |
| 2 Position Adjustable |
| User Supplied Quick Grip |
| User made MDF or Plywood |
| N/A |
| N/A |
| N/A |
|
| TD330 |
| 2019 |
|
|
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| YES |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
| NO |
|
| Fixed Width – TD Only |
| Fixed Width – TD Only |
| Fixed Width – TD Only |
| Fixed Width – TD Only |
|
| Recordable, Repeatable |
| N/A |
| N/A |
|
| 13/16″ |
| 1/8″ |
| 12 1/2″ |
| 1 1/4″ |
| 13/16″ |
| N/A |
|
| N/A |
| N/A |
| N/A |
| 1/2″ |
| N/A |
| 1 bit: 1/2″ 8º |
| 1 bit: 1/2″ |
| N/A |
| N/A |
| e10 eBush |
| N/A |
| YES |
| Online |
|
| NO |
| 2 |
| N/A |
| N/A |
| NO |
|
| Glass filled Nylon |
| N/A |
| N/A |
| Adjustable Screw On |
| User Supplied Quick Grip |
| User made MDF or Plywood |
| N/A |
| N/A |
| N/A |
